Rod Breakdown Machines
Description
Our range of rod break down machine is manufactured as per the latest International usages. We also have facility to customize our range according to the client's requirements. These
are available in various specifications, some of them are designed 9/11/13 die for aluminium and copper wires along with spooling machine and dead block coiler.
Specifictions
Machine type |
13 D |
9 D |
Inlet diameter |
@8 |
@8 |
Out let diameter |
@1.2-@ 3.2 |
@2.2-@3.2 |
Drawing dies No. / Max. |
1200 |
600 |
Slip ration of m/s |
13 |
9 |
Slip ratio of m/c |
23.60% |
23.60% |
Fix Speed capstan slip ratio |
20.00% |
20.00% |
Capston |
Tungsten |
Capstan Dia. (Max.) |
@450 |
Fix Speed Capton dia. |
@450 |
Frame |
Weld, Two conjunctions |
Main motor |
250 Kw, Dc motor 160 Kw, DC motor |
Spoolermotor |
15 KW Three phase inductor motor |
Revise system |
PID synchronous spooler |
Inverter Control |
DC speed regular
+ dua inverter control |
Transmission type |
Gear |
Send out - method |
Over Head |
Traversing unit |
Decelerate Motor |
Tension control |
Pneumatic balance by swing arm |
Lubrication system of Wire drawing
|
All immerse type |
Suitable diameter of spool |
@800 pay -off frame in coils |
Capacity for wire receiving |
200-1800 |
Power source |
380 V |
Brake |
Pneumatic brake |
Description
Dummy Our range of rod break down machine is manufactured as per the latest International usages. We also have facility to customize our range according to the client's requirements. These are available in various specifications, some of them are designed 9/11/13 die for aluminium and copper wires along with spooling machine and dead block coiler.
|
For Ferrous |
Non Ferrous |
Material |
Low Carbon Steel Wire |
Copper/Al. Wire |
Wire Range |
3.2 – 1.2mm |
15 – 4mm |
Roller Dia |
250mm |
250mm |
Roller Material |
AISI D2 |
AISI D2 |
Type |
Single/tandem |
Single/tandem |
Take up Bobbin size |
Flange
Barrel
Traverse
Bore |
600mm
500mm
150mm
70mm |
Flange
Barrel
Traverse
Bore |
762mm
300mm
280mm
135mm |
Traverse |
Rolling ring |
Rolling ring |
|
Wire Straightning & Cutting Machine
Description
Dummy Our range of rod break down machine is manufactured as per the latest International usages. We also have facility to customize our range according to the client's requirements. These are available in various specifications, some of them are designed 9/11/13 die for aluminium and copper wires along with spooling machine and dead block coiler.
|
Wet Wire Drawing OTO Type
Description
Dummy Our range of rod break down machine is manufactured as per the latest International usages. We also have facility to customize our range according to the client's requirements. These are available in various specifications, some of them are designed 9/11/13 die for aluminium and copper wires along with spooling machine and dead block coiler.
|
Pay off |
Tungsten |
Dry Drawing Block |
Wet Drawing Machine |
Treatment Tank |
BB Block |
Spooler |
Vertical From coils Horizontal or Vertical from spools |
Optional |
Single Die OTO 250 mm dia Block |
Four shaft slip type submerged over flow type TC cones, 11die |
SS 316 Five compartement pneunatically With covers |
Pinch pass single rotation Die |
300mm dia plastic spool Or 800 mm die steel spool |
Technical Data
Wire \ Material |
: |
WR Grade |
No. of Drafts |
: |
1+11+1 |
Percentage Elongation on
Machine from draft 1 -10 |
: |
16.7% |
Drafts 11 |
: |
13% |
Draft 12 after copper coating |
: |
12% |
Inletr Wire Dia Range |
: |
1.80 – 2.40mm |
Outlet Wire Die Range |
: |
0.80 – 1.60mm |
Maximum Wire Outlet Speed |
: |
12m/s |
Drawing Machine Motor Power |
: |
5 kw + 225 kw + 5 kw |
At a Glance
• Top quality finished product
• Practical production speed 12 m/s
• Drawing, coppering and spooling, same tine on same horizontal plane
• R educed Wire Torsion
Wire Pointing Machine Motorised
High hardened adjustable rolls. Shearing attachment (optional). Hand operated pointers are also available.
SPECIFICATIONS
Model Pointing Range |
HWP-1 |
HWP-2 |
HWP-3 |
HWP-4 |
HWP-5 |
HOP-01 |
Power Installed (max.) |
26mm - 16mm 20HP |
16mm-6mm
10HP |
10mm - 2mm
5HP |
8mm - 2mm
3HP |
5mm - 1mm
3HP |
2mm - 0.9mm |